华为OLT,MA5680T运维常用命令
0、name：root password: admin
1、MA5680T> enable 进入特权模式
2、MA5680T # config 进入终端配置
3、MA5680T (config)# switch language-mode 中英文切换
4、MA5680T (config)#display board 0 框 查看所有的单板
5、MA5680T(config)# board confirm 0 框 确认所有单板
6、MA5680T (config)# interface gpon 0/1 框/槽
7、(config-if-gpon-0/1)# port 0 ont-auto-find enable 端口
8、MA5680T (config)#display ont autofind all 查看自动发现的ONU
9、MA5680T (config)# display mac-address port 0/1/0 框/槽/端口
通过端口查看ONU的mac-address
10、MA5680T (config)# display mac-address vlan 100 VLAN-id
通过VLAN查看ONU的mac-address
11、MA5680T(config)#display service-port port 0/1/0 ont 1 (框/槽/端口 ONU-id）
查看ONU的service-port 信息
12、MA5680T(config)# display version
查看设备版本信息
13、MA5680T(config)# display dba-profile all
查看DBA 模板
14、MA5680T(config)#display ont-lineprofile gpon all
查看线路模板
15、MA5680T(config)#display ont-srvprofile gpon all
查看业务模板
16、MA5680T(config)# display board 0
查看所有单板信息
17、MA5680T(config)# display board 0/1 框/槽
查看单板上ONU信息
18、MA5680T(config-if-gpon-0/1)#display ont optical-info 0 1 端口/ONU-id
查看ONU收光功率
19、MA5680T(config-if-gpon-0/1)#display ont info 0 1 端口 ONU-id
查看ONU信息
20、MA5680T(config-if-gpon-0/1)#display ont state 0 1 端口 ONU-id
查看ONU状态
21、MA5680T(config-if-gpon-0/1)#display port info 0 端口
查看PON板的端口信息
22、MA5680T(config-if-gpon-0/1)#display port state 0 端口
查看PON板端口状态
23、MA5680T(config-if-gpon-0/1)#display ont register-info 0 1 端口 ONU-id
查看ONU注册信息
24、MA5680T(config-if-gpon-0/1)#display ont version 0 1 端口 ONU-id
查看ONU版本信息
25、MA5680T(config)#display patch all
查看设备补丁及状态
26、MA5680T(config)#display mac-address all
查看设备下所有的mac地址
27、MA5680T(config)#display mac-address board 0/1 框/槽
查看单板下的mac地址
28、MA5680T(config)#display mac-address port 0/1/0 框/槽/端口
查看此端口下的mac地址
29、MA5680T(config)#display pstn state 0/2 框/槽
查看第二块单板的语音用户状态
30、MA5680T(config)#display version 0/1 框/槽
查看单板版本
31、MA5680T(config)#display alarm history all
查看历史告警
32、MA5680T(config)#display event history all
查看历史事件告警
33、MA5680T(config)#display if-h248 all
查看H248接口状态
34、MA5680T(config)#display log all
查看操作日志
35、MA5680T(config)#board reset 0/3 框/槽
重启单板
36、MA5680T(config)#reboot system
重启设备
MA5680T(config)#display current-configuration 查看全局配
37、MA5680T(config)#display alarm active all
查看设备所有告警
39、MA5680T(config)#interface giu 0/17 框/槽
MA5680T(config-if-giu-0/17)#display Port ddm-info 0
查看上行板光衰
MA5680T(config-if-giu-0/17)#display Port opticstate 0
查看上行光模块信息
40、MA5680T(config)#display mac-address all
查看用户MAC地址上报情况
41、MA5680T(config)#display mac-address vlan 100
查看vlan 100 下学习到的地址信息
42、MA5680T(config)#display Port traffic 0
显示上行口实时流量
43、MA5680T(config)#display vlan all
显示vlan 列表
44、MA5680T(config)#display current-configuration section vlan
查看配置中所有的vlan配置
45、MA5680T(config)#display current-configuration section public
查看snmp配置
46、MA5680T(config)#display current-configuration section epon
查看所有epon单板下配置
47、MA5680T(config)#display current-configuration section epon-0/1
查看模块epon单板下的配置
48、MA5680T(config)#display current-configuration section bbs
查看service-port配置
49、MA5680T(config)#display service-Port all
查看service-Port状态
50、MA5680T(config)#display current-configuration section global
查看系统模板配置信息
51、MA5680T(config-if-epon-0/1)#display ont port state 0 0 eth-port all
显示ONT ETH口实时流量
52、MA5680T(config-if-epon-0/1)#ont reset 0 3 端口 ONT-id
重启ONT
53、MA5680T(config-if-epon-0/1)#ont reset 0 3 端口 ONT-id
重新注册ONT
54、MA5680T(config)#board delete 0/3 框/槽
删除业务单板
55、MA5680T(config)#undo service-Port 先删
MA5680T(config)#Port vlan 再删
MA5680T(config)#vlan 后删
vlan删除
56、MA5680T(config)#erase Flash data active
删除全部配置信息
57、MA5680T(config)#undo traffic table ip
删除流量模板
58、MA5680T (config)# terminal user name
请输入用户名(长度<6，15>)：wojin
请输入用户密码(长度<6，15>)：admin
请确认密码(长度<6，15>)：admin
模板名称(<=15位)[root]：root
请输入用户权限：
1普通用户 2操作者 3管理者：3
请输入用户可重复登录次数(0--4)：3
请输入用户的附加信息(<=30位)：
用户添加成功
用户名修改
>>MA5680T(config)#terminal user password //修改用户密码
59、MA5680T(config)# display io-packetfile information
查询单板软件包
1 display ont info all 查询ONT的相关信息
2 display mac-address all 查看光猫MAC地址
3 ipconfig /all 查看自身 IP
4 display board 0 查看所有单板
5 display mgpstnuser 0/2 查看物理号
6 display ont autofind all 查看全部示注册的光猫
7 board reset 复位单板（请慎重使用此命令，影响业务）【复位主控板或系统，执行reboot命令。】
8 board delete 0/3 删除0框3槽上的业务单板
9 mgpstnuser batdel 0/2/0 0/2/63 删除物理号！在（esl user）模式中！
10 VLAN删除：先删 undo service-port 再删 port vlan 最后删vlan
11 复位MG端口：reset全删除：erase flash data
12 time 2009-03-18 10:39:50 修改设备时间
13 board confirm 0 确认0框所有单板
14 ont delete 删除光猫
15 display current-configuration section epon-0/10 查看10槽位EPON板配置
16 display ont ipconfig 查询ONT的IP地址的相关配置
17 display time 检查设备时间
18 display alarm history all 查看告警历史（所有）
19 ONU 与OLT间光通路的光衰减必须在15dB--25dB 之间
20 删除 ONU全部配置
erase flash data
21 删除流量模板
undo traffic table ip
22 查看语音扣板
narrow resource----display dsp state 0/0/1
（Failure: frame 0 slot 0 does not have dsp resource）
上述语句说明查询失败，ASDA语音扣板故障
23 查看主机MAC地址
display sysman mac-address
24 查看用户带宽
display board 0/3或0/4找到端口的线路模板，后display adsl line-profile 端口号 system parameters 5 1
开通OLT其他光猫互通功能命令：
CD_yz_5680T>enable
CD_yz_5680T#config
CD_yz_5680T(config)#
CD_yz_5680T(config)#
CD_yz_5680T(config)#diagnose
CD_yz_5680T(diagnose)%%su
Challenge:CMG2WPZY
Please input password:
CD_yz_5680T(diagnose)%%
CD_yz_5680T(diagnose)%%
CD_yz_5680T(diagnose)%%su
Challenge:CMG2WPZY
Please input password:
CD_yz_5680T(su)%%
CD_yz_5680T(su)%%
CD_yz_5680T(su)%%
CD_yz_5680T(su)%%
CD_yz_5680T(su)%%
CD_yz_5680T(su)%%idle-timeout ?
---------------------------------------------
Command of user Mode:
---------------------------------------------
minutes<U><1,255> Timeout length value(Min.)
CD_yz_5680T(su)%%idle-timeout 171
The value you set is greater than 100, which may suspend the terminal and
impair the system management.
Are you sure to config this value? (y/n)[n]:
CD_yz_5680T(su)%%idle-timeout 171
The value you set is greater than 100, which may suspend the terminal and
impair the system management.
Are you sure to config this value? (y/n)[n]:y
CD_yz_5680T(su)%%display system ont ?
---------------------------------------------
Command of su Mode:
---------------------------------------------
diagnose-info <Group>ONT command group
CD_yz_5680T(su)%%display system ont diagnose-info ?
---------------------------------------------
Command of su Mode:
---------------------------------------------
<cr> Please press ENTER to execute command
CD_yz_5680T(su)%%display system ont diagnose-info
-----------------------------------------------------------------------
Diagnose code: 4,48575443#1,48576543_1_0
-----------------------------------------------------------------------
F/S/P ONT-ID Cause Time
-----------------------------------------------------------------------
- - - -
-----------------------------------------------------------------------
CD_yz_5680T(su)%%
CD_yz_5680T(su)%%config
CD_yz_5680T(config)#save
{ <cr>|configuration<K>|data<K> }:
Command:
save
CD_yz_5680T(config)#
It will take several minutes to save configuration file, please wait...
CD_yz_5680T(config)#
Configuration file has been saved to active board successfully, and then
system will duplicate it to the standby board
CD_yz_5680T(config)#dis
Note: The duplicated configuration file in 0 frame 10 slot takes effect after
being activatedp
CD_yz_5680T(config)#dis
The data is being saved, please wait a moment...
CD_yz_5680T(config)#dislay
1 [2016-02-18 19:36:34+08:00]:The percentage of saved data on 9 slot's control
board is: 66%
CD_yz_5680T(config)#display
1 [2016-02-18 19:36:34+08:00]:The percentage of saved data on 10 slot's
control board is: 63%
CD_yz_5680T(config)#display board
1 [2016-02-18 19:36:38+08:00]:The percentage of saved data on 9 slot's control
board is: 72%
CD_yz_5680T(config)#display board
1 [2016-02-18 19:36:38+08:00]:The percentage of saved data on 10 slot's
control board is: 69%
CD_yz_5680T(config)#display board 0/1
---------------------------------------
Board Name : H806GPBD
Board Status : Normal
---------------------------------------
------------------------------------------------------------------------------
Power Status Power-off cause Power-off Time
------------------------------------------------------------------------------
POWER-ON - -
------------------------------------------------------------------------------
-------------------------------------------------------------
Port Port min-distance max-distance Optical-module
type (km) (km) status
-------------------------------------------------------------
0 GPON 0 20 Online
1 GPON 0 20 Online
2 GPON 0 20 Online
3 GPON 0 20 Online
4 GPON 0 20 Online
5 GPON 0 20 Online
6 GPON 0 20 Online
7 GPON 0 20 Online
1 [2016-02-18 19:36:41+08:00]:The percentage of saved data on 9 slot's control
board is: 78%
CD_yz_5680T(config)#
1 [2016-02-18 19:36:41+08:00]:The percentage of saved data on 10 slot's
control board is: 75%
CD_yz_5680T(config)#
-------------------------------------------------------------
-----------------------------------------------------------------------------
F/S/P ONT SN Control Run Config Match Protect
ID flag state state state side
-----------------------------------------------------------------------------
0/ 1/0 0 4857544327496225 active online normal mismatch no
0/ 1/0 1 485754430D263723 active online normal mismatch no
0/ 1/0 2 485754432177951A active online normal mismatch no
0/ 1/0 3 485754433810A221 active online normal mismatch no
0/ 1/0 4 48575443952C413A active online normal mismatch no
0/ 1/0 5 5A544547C416DE91 active online normal mismatch no
0/ 1/0 6 485754430D309F23 active online normal mismatch no
0/ 1/0 7 485754431247A61E active online normal mismatch no
0/ 1/0 8 485754432288801A active online normal mismatch no
0/ 1/0 9 48575443E33C192E active online normal mismatch no
0/ 1/0 10 485754434760D639 active online normal mismatch no
0/ 1/0 11 48575443BBAE9247 active online normal mismatch no
0/ 1/0 12 48575443CD168340 active online normal mismatch no
0/ 1/0 13 5A544547C416DE63 active online normal mismatch no
-----------------------------------------------------------------------------
F/S/P ONT-ID Description
-----------------------------------------------------------------------------
0/ 1/0 0 YangZhi
0/ 1/0 1 ONT_NO_DESCRIPTION
1 [2016-02-18 19:36:44+08:00]:The percentage of saved data on 9 slot's control
board is: 84%
CD_yz_5680T(config)#
1 [2016-02-18 19:36:44+08:00]:The percentage of saved data on 10 slot's
control board is: 81%
CD_yz_5680T(config)#
0/ 1/0 2 ONT_NO_DESCRIPTION
0/ 1/0 3 ONT_NO_DESCRIPTION
0/ 1/0 4 ONT_NO_DESCRIPTION
0/ 1/0 5 ONT_NO_DESCRIPTION
0/ 1/0 6 ONT_NO_DESCRIPTION
0/ 1/0 7 ONT_NO_DESCRIPTION
0/ 1/0 8 ONT_NO_DESCRIPTION
0/ 1/0 9 ONT_NO_DESCRIPTION
0/ 1/0 10 ONT_NO_DESCRIPTION
0/ 1/0 11 ONT_NO_DESCRIPTION
0/ 1/0 12 ONT_NO_DESCRIPTION
0/ 1/0 13 ONT_NO_DESCRIPTION
-----------------------------------------------------------------------------
In port 0/ 1/0 , the total of ONTs are: 14, online: 14
In port 0/ 1/1 , the total of ONTs are: 0, online: 0
In port 0/ 1/2 , the total of ONTs are: 0, online: 0
In port 0/ 1/3 , the total of ONTs are: 0, online: 0
In port 0/ 1/4 , the total of ONTs are: 0, online: 0
In port 0/ 1/5 , the total of ONTs are: 0, online: 0
In port 0/ 1/6 , the total of ONTs are: 0, online: 0
In port 0/ 1/7 , the total of ONTs are: 0, online: 0
CD_yz_5680T(config)#
1 [2016-02-18 19:36:47+08:00]:The percentage of saved data on 9 slot's control
board is: 90%
CD_yz_5680T(config)#
1 [2016-02-18 19:36:47+08:00]:The percentage of saved data on 10 slot's
control board is: 87%
CD_yz_5680T(config)#switch language-mode