华为MA5626 OUN恢复出厂设置密码 华为MA5620/MA5626空库文件
Platform System start ... //设备启动
Memory Data Bus Test .................pass.
Memory Address Bus Test .................pass.
Press 'Ctrl+T' To Start Memory Complete Test
Trace code : 0x10047200
Copy from ROM to RAM ...... OK!
Uncompress from ROM to RAM ...... OK!
System Vfs init...OK
The latest reboot is caused by : others
Copyright (c) 1998 - 2011 by Huawei Technologies Co.,Ltd.
All Rights Reserved.
The last update date of base BIOS B is : Jan 4 2011 09:43:09
===============================================================
BOARD INFORMATION :
CPU: ARM Integrator - ARM1176JF (ARM). Processor running at 533Mhz
256M bytes DDRAM, 64M bytes flash memory installed on board
Baudrate of serial channel is 9600bps
Board's LAN IP address is 10.11.104.2
Board's LAN Subnet mask is 255.255.255.0
Board's LAN MAC address is 78:1D:BA:F6:90:20
===============================================================
System is booting from base BIOS...
Base BIOS version is 200
Press <D> key to stop auto-boot 1 //到这里按“d”键中断启动
Main menu:
==============================================
0 Boot from flash
1 Load files
9 Reboot system
Please enter a choice : 1 //选择1 Load files
SubMenu: Load files
==============================================
0 Back to main menu
1 Download program file to flash
2 Download Data file to flash
3 Download basebios file to flash
4 Download cpld file
5 Download packet file
d Download program file to ddram
6 Download updatetool file to flash
7 Download equipment file to flash
Please enter a choice : 2 //选择2 Download Data file to flash配置库文件
Please select load mode[default: 1 -- TFTP load mode]:
============================================
0 Xmodem load mode
1 TFTP load mode
Q Quit
Please enter your choice:0 //选择0. 使用串口传输
Please Select download speed:
1. 9600BPS
2. 19200BPS
3. 38400BPS
4. 57600BPS
5. 115200BPS
Select baudrate[default : 1]: 1 //选择1. 9600BPS 波特率为9600
You will download file by xmodem at 9600 BPS, are you sure? (y/n) [y]y //按y 确认
Please change baudrate to 9600 BPS and press enter key //按回车键（Enter）进行下一步
Press CTRL+C key to abort!
Waiting ...CCCCCCC //这个时候需要看看第二步过程3 在软件上选择发送文件，协议为“xmodem”
Download Success! 44658 bytes download OK
save file to main area.....ok!
save file to spare area.....ok!
SubMenu: Load files
==========================================//至此库文件就恢复完成，后续步骤，重启
0 Back to main menu
1 Download program file to flash
2 Download Data file to flash
3 Download basebios file to flash
4 Download cpld file
5 Download packet file
d Download program file to ddram
6 Download updatetool file to flash
7 Download equipment file to flash
Please enter a choice : 0 //按0 返回上一步
Main menu:
==============================================
0 Boot from flash
1 Load files
9 Reboot system
Please enter a choice : 9 //按9重启设备。
>>User name:root
>>User password: //输入用户名“root”密码“mduadmin”进入设备